How to Remove Paint from Stainless Steel

how to remove paint from stainless steel

Looking for how to remove paint from stainless steel? Great, in this guide, you’ll discover some of the effective ways to remove paint from stainless steel appliances.

Whether you are busy with a DIY project, or on a contract job, painting or repainting gives a freshness to things. But the paint can also stain other appliances or tools accidentally and will require removal.

But before we go into all the tricks to remove paint from stainless steel materials, let’s look at what stainless steel is.

how to remove paint from stainless steel

What is Stainless Steel?

Stainless steel is a metal that is made up of iron-based alloys that contain a minimum of approximately 11% chromium. This composition prevents the iron from rusting and also provides heat-resistant properties.

The ability of stainless steel material to resist ferric oxide formation is because of the presence of chromium in the alloy. This is because it forms a passive film that protects the underlying material from corrosion attacks and the ability to self-heal from oxygen attack.

Also Read:

How to remove spray paint from metal

Remove spray paint on walls in 5 steps

Supplies Needed to Remove the Paint from the Stainless Steel

Here are the basic supplies you will need for removing the paint. Some you may already have in the house.

  • Turpentine
  • Soft clean cloth
  • Household sink bleach
  • Vinegar
  • A saucepan or microwave
  • Putty knife paint scrapper
  • Measuring cup
  • sponge or bristle brush

How to Remove Paint from Stainless Steel Appliances in 4-Steps

Stainless steel appliances are some of the best appliances that are resistant to rusting and scratching. This makes them many people favorite appliances when shopping for equipment.

But in the process of one of your painting projects, the paint can accidentally stain this metal and will have to be removed. Luckily, there are some ways to get rid of it.

This can be accomplished with some common paint removal supplies.

Step 1: Apply Turpentine

Start by applying the turpentine to the corner of the clean soft cloth. Then rub the soaked turpentine cloth against the paint of the stainless steel in a slow, circular motion for 30 seconds.  This spirit is a good paint remover.

Take the cloth off and check to see if the paint has started dissolving. repair the process for all the paint to dissolve.

Step 2: Rinse with Water

After the paint has been removed, rinse the turpentine area with room temperature water to get rid of the spirit. After that, wipe the area with a clean soft dry cloth.

Step 3: Apply Scratch-Free Household Sink Bleach

Apply scratch-free household sink bleach to a water-moistened cloth. Rub the cloth against the area where the paint was in slow, circular motions for 30 seconds. Rinse the bleach off the stainless steel with room temperature water. Let the stainless steel air-dry.

How to Remove Paint from Stainless Steel Vinegar

Almost every kitchen has vinegar. It is a product that is popularly added to foods such as salads and pickles. However, if you are only using vinegar for food, then you are not maximizing its full potential in your home.

There are two known types of vinegar and these are; white and apple cider vinegar. For the purpose of this guide, white vinegar is recommended because it has a higher acidity level of about 5% than the other type. This makes it effective an effective remover and cleaner.

If you like trying natural DIY ways of getting things done, then the vinegar method will appeal more to you. Because it’s a more natural way of removing paint without the use of chemicals.

Plus, using vinegar doesn’t require any skill, unlike commercial paint removers that will require strict adhesion to instructions.

Below is a DIY vinegar paint remover.

Step 1: Heat the Vinegar in Pan

Measure half a cup of vinegar and put it in a saucepan. Then place it over heat or place it in a bowl that is heat resistant and heats it inside the microwave. Heat it to a point that is hot but not boiling.

Step 2: Scrub the Paint with Sponge or Brush

Dampen a clean sponge or any bristle paintbrush in the vinegar and scrub the paint stain gently. Be gentle so as to not scratch the metal surface.

Step 3: Let the Vinegar Sit

Leave the vinegar on for about 10 to 15 minutes.  This will allow the hard dried paint to loosen up.  Now gently remove the loose paint off and if it doesn’t all come off, repeat the process again until it’s all removed.

It is recommended that if you intend to do any polishing, you use a putt paint scraper to get rid of any left-over paint flakes on the surface and then wipe the surface with a clean damp cloth.

So you may be wondering what makes vinegar a paint remover?. Well, here are some properties that make vinegar an effective paint remover.

Cleansing Properties of Vinegar

  • Acidic. Vinegar is acidic. This acidity is a must-have for some cleaning solutions.
  • Rinses off without a trace. Water rinses Vinegar off entirely after use.
  • Relatively available and cheap.
  • Solvent. Things like soap and grease are soluble in Vinegar, i.e., Vinegar dissolves them.

Final Thoughts

Paint can touch undesirable places and things such as your precious stainless steel when you are painting. Though removing the stain can be a bit of work.  But with these steps here, you can accomplish it easily and affordably.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *